Source(s) of quickbooks accountant edition 2013 this and additional information:.
USB Revision.0 type A Connector USinout, Cable Assembly Pin Signal name Description 1 vbus Red 2 D- White 3 D Green 4 GND Black 5 StdA_ssrx- Blue 6 StdA_ssrx Yellow 7 GND_drain ground 8 StdA_sstx- Purple 9 StdA_sstx Orange Shell Shield Connector Shell USinout.
USB.0 is the successor of USB.0.
Drain Wire is by definition uninsulated.
However, it is not possible to plug a USB.0 Micro-B plug into a USB.0 Micro-B receptacle, due to a physically larger connector.The raw throughput is 4 Gbit/s, and the specification considers it reasonable to achieve.2 Gbit/s (0.4 Gbyte/s or 400 MByte/s or more, after protocol overhead.Backward compatibility applies to connecting a USB.0 Standard-B plug into a USB.0 Standard-B receptacle.The main power and ground wires should use wires of between 20 and 28 gauge.Efforts have been made to ensure this page is correct, top 10 football games for pc but it is the responsibility of the user to verify the data is correct for their application.USB.0 receptacles are backward compatible with.USB3 sstx 9 8, gND 7 9, uSB3 ssrx- 5 10, uSB3 ssrx.No portion of this webpage may be reproduced in any form without providing visible html link.Note the two drain wires have a common connection point on the connector GND_Drain.USB.0, uSB.0 Cable Diagram, the USB.0 specification is the combination of the physical SuperSpeed bus combined in parallel with the physical USB.0 bus.
The two sets of differential wire pars added under USB.0 should use a wire gauge of between 26 and.
USB.0 connectors are usually distinguished from their USB.0 counterparts by blue color-coding of the receptacles and plugs, and the initials SS.
Similar principle of backward compatibility applies to connecting a USB.0 Standard-A plug into a USB.0 Standard-A receptacle.Webmaster permission required in any other cases.The Standard-A is used for connecting to a computer port, at the host side.Direction, color, description 1, vBUS red 5 V power 2, d- white, uSB.0 Data - 3, d green.USB.0 connectors are usually distinguished from their USB.0 counterparts by blue color-coding of the receptacles and plugs.The braid should be terminated on the metal shell of the connector.That way, USB.0 Micro-A host connector preserved its backward compatibility with the USB.x/2.0 Micro-B cable plugs.Pin, number, pin, name, description 1, vBUS 5V 2, uSB.The Standard-B is used at the device side.